Use this keyguard with the built in iPad keyboard. Select either QWERTY/QWERTZ or AZERTY configuration from the pull down menu above. Keyguard may be ordered either full size or half size(for applications requiring access to the screen).
Laser cut from 1/8th inch clear acrylic. Includes four 1/8th inch bumpers that you can attach to the keyguard if needed(may help prevent accidental activation of a key).
If you have a need for a different keyboard configuration please contact us.
Important Notes About Cases and Mounting to Read Before Ordering
* Keyguards do not attach permanently to the iPad or the case, but are mounted with non-destructive attachments. Please click here for information regarding cases, including available options for keeping the keyguard in place. It is important that your keyguard is ordered to fit the case you have, or plan to use.
** The mounting methods are described briefly below with a list of cases supported:
Suction Cups - Four small suction cups raise the keyguard 3/16" above the screen and hold it securely. Supported cases include no case, Big Grips Frame, Big Grips Lift, ChatWrap, Gripcase, M-Edge Super Shell. May work on other foam-type cases when the softare allows room to place the cups, but not supported on rigid cases with small screen openings. Not supported on any case that claims to be waterproof, because the suction cups may interfere with the watertight seal.
Attached Straps - Keyguard lies 1/8 - 1/4" above screen to minimize accidental touches. Good for heavy droolers. All cases are supported except Big Grips Lift and Big Grips Frame.
Flush-Mounted Straps - Keyguard lies flat on or barely above the screen. All cases are supported except Big Grips Lift and Big Grips Frame.
Snap-In Bottom Flange - Slips under edge of case to secure without any external hardware. See it described here. May require partial disassembly of case to install the first time. This is a semi-permanent mount and cannot be easily swapped in an out on rigid cases. Supported cases include AMDI iAdapter, Armorbox Kido, Beetle, Big Grips, ChatWrap, Fintie Kiddie, GoNow, Griffin Survivor, Gripcase, Gumdrop Bounce Skin, Gumdrop Drop Tech, Gumdrop Foam Tech, Gumdrop Hideaway, HDE Shock Proof, KaysCase KidBox, Kidz Cover, Lifeproof NUUD and Fre, Otterbox Defender, Trident, Ultimate II. Note: The snap-in attachment will interfere with the seal on cases that claim to be waterproof. Your iPad will be damaged if you wash it or submerge it.
Top Flange - An additional top flange is attached to the keyguard for mounting with Velcro™. Supported cases include AMDI iAdapter, GoNow Rugged, GoNow Sleek, Griffin Survivor All-Terrain, Otterbox Defender. Also works with suction cup tape on the iAdapter. This is the best method to use if you want to add and remove the keyguard easily and/or often.