Keyguard for app Speak4Yourself. You can have your keyguard cut with either Circles or Squares. Openings are slightly smaller than .5 inches. Please note, keyguards for the iPad Mini will have openings approximately .375 inches.
We do not recommend using a keyguard for this app on the iPad Mini, the openings are extremely small. We will make you a keyguard if you want us to however keyguards for the iPad Mini are non-returnable.
Keyguards can also be made with an opening for access to the iPad's "Slide to Unlock" button. This requires 5 of the openings to be combined into 1, see images above.
The color acrylic option is NOT recommended for this keyguard.
App Settings and Options
This keyguard supports different designs based on user settings and preferences. Each of these affects the positioning of items on the screen, and thus the design of the keyguard itself. Your Lasered Pics keyguard will be truly custom-designed to match every one of the choices you make for the end user.
Cell Openings - If you choose circles, do not choose colored acrylic, as some information will be covered by the keyguard.
Opening for Slide to Unlock - If you choose Open, the five cells in the center of the bottom row will be combined into one wide one. This opening is roughly where the iPad used to put the little "Slide to Unlock" message prior to iOS 10. If you have the speech display open, you can swipe up there to unlock the iPad, so you can leave this setting off (closed), as you can if you're on iOS 10 or later.
Important Notes About Cases and Mounting to Read Before Ordering
* Keyguards do not attach permanently to the iPad or the case, but are mounted with non-destructive attachments. Please click here for information regarding cases, including available options for keeping the keyguard in place. It is important that your keyguard is ordered to fit the case you have, or plan to use.
** The mounting methods are described briefly below with a list of cases supported:
Suction Cups - Four small suction cups raise the keyguard 3/16" above the screen and hold it securely. Good for heavy droolers. Supported cases include no case, Big Grips Frame, Big Grips Lift, Gripcase, M-Edge Super Shell, XGear 360.
Attached Straps - Keyguard lies 1/8 - 1/4" above screen to minimize accidental touches. Good for heavy droolers. All cases are supported except Big Grips Lift and Big Grips Frame.
Flush-Mounted Straps - Keyguard lies flat on or barely above the screen. All cases are supported except Big Grips Lift and Big Grips Frame.
Snap-In Bottom Flange - Slips under edge of case to secure without any external hardware. See it described here. May require partial disassembly of case. This is a semi-permanent mount and cannot be easily swapped in an out on rigid cases. Supported cases include AMDI iAdapter, Armorbox Kido, ChatWrap, Fintie Kiddie, Griffin Survivor, Gripcase, Gumdrop Bounce Skin, Gumdrop Drop Tech, Gumdrop Foam Tech, Gumdrop Hideaway, HDE Shock Proof, KaysCase KidBox, Otterbox Defender, RJ Cooper Ultimate II, Unicorn Beetle.
Top Flange - An additional top flange is attached to the keyguard for mounting with Velcro™. Supported cases include AMDI iAdapter, GoNow Rugged, GoNow Sleek, Griffin Survivor All-Terrain, Otterbox Defender, Silver Kite ChatWrap. Also works with suction cup tape on the iAdapter. This is the best method to use if you want to add and remove the keyguard easily and/or often.